Ice Maker Repair Service In Dallas Texas

ice maker repair dallas texas


During the warm summer season days, the ice maker is our friend in the kitchen. Yet what if your ice maker suddenly stops making any ice, what are you to do? Well, my friend, you are in luck, due to the fact that this write-up will help you understand the reason why as well as what are the required steps to execute in order to settle the issue.

So, why is your ice maker not making any type of ice?

1. Power link

Before anything else, check whether your maker is connected to the power electrical outlet, if it is, inspect if the power outlet is working well as well as is transferring electrical present. After that activate your ice maker to inspect if it is fine or otherwise. The wire along the appropriate side of the device should be lowered regarding it goes. If this is in a raised placement, your device is off and also it will not make any type of ice.

2. Appropriate freezer temperature level

If the icemaker cord is positioned properly and is activated, proceed to examine the freezer temperature level. The temperature should be within the series of 0 to 8 levels Fahrenheit. If it’s over 10 to 12 levels, your machine will certainly not produce ice.
For a newly mounted icemaker, you will certainly need approximately 1 day to allow the equipment feature and also cool down. A recently mounted icemaker may not function up until the ice mold temperature has actually dropped to concerning 15F – 16F degrees. If you have simply added a water line to the refrigerator, it might occupy to about an hour and also a half for the machine to begin functioning. Also, a newly installed water line might have air in the line. It can in some cases take a few ice making cycles to clear the line of air.

3. Examine water source

Okay, in order to make ice, you need water. So make sure that there is water streaming to the ice maker. Look for kinks in the tubes as well as watch out for icy bits stuck within the water tube. Likewise make sure that the household water supply is switched on. Often the water inlet shutoff can spoil. If there is water in the ice maker, yet it’s not freezing, use a fridge freezer thermostat to confirm that the temperature level is cold sufficient for it to ice up.

4. Examine copper supply

Make certain the copper supply line to the refrigerator is turned on under the sink, or coming from the cellar.
After examining all the above pointed out elements and certain that the freezer is chilly sufficient however it is still not making any kind of ice, check and also really feel the bottom of the ice manufacturer system. This spot is typically cool for an ice maker running smoothly. But if it is warm or cozy, it is feasible that the little burner within is stuck or damaged. This heating element when activated thaws all-time low of the dices to ensure that they can be released and also gathered by the ejector blades. In this instance, you will need to replace this part in order to make your ice manufacturer work efficiently once again.

Once you have done all of your checks mentioned in this article and if then you still get no ice from your ice maker contact us at Dallas Appliance Repair for ice maker repair service Dallas Texas at 469-671-2500or you can visit our website.


Recent Posts

Contact Us

Dallas Appliance Repair
12400 coit rd suite 200, Dallas, TX, 75251

Call Us: (469) 617-2500



Contact Form